Our Toro STX-26 Stump Grinder rental has two simple levers that are simple to learn, master and use. Combine these easy-to-use controls with tracks and transport speeds exceeding 4 mph, and you get maximum productivity.
The Intelli-Sweep™ feature automatically slows the sweep speed of the cutting head based on the load of the wheel, so heavy cutting loads won’t bog down the engine. The tracks travel easily over muddy areas, with the low center of gravity adds side hill stability for access to any job, in any condition. In addition, the hydraulically driven head means no chance of expensive belts breaking or slipping no adjusting tension - guaranteeing optimal performs time after time.
Toro STX-26 Stump Grinder Features:
- Easy-to-use controls
- Intelli-Sweep™ feature automatically adjusts sweep speed based on load on the wheel to maintain optimal operation
- Easy to load on any trailer
- Track drive increases hill-side stability
- Toro exclusive traction control system similar to Dingo TX and TRX trenchers
Track Design
• Allows for zero turn capability
• Provides a low center of gravity and large footprint
• Increased stability on side hills
• Eliminates tire ruts and flat tires
• Operates in wet & soft ground conditions.
Traction Controls
Easy-to-use control system offers smooth operation and fewer lever/nobs than conventional stump grinders. Two simple controls operate all traction and grinder functions.
1) Left/right traction control (forward, reverse, turn)
2) Sweep, lift/lower and engagement of grinder head.
Full Hydraulic Operation
• Eliminate the labor of tightening or replacing expensive poly-chain® belts or clutches
• No need to replace expensive cogged pulleys
• No worry of customers engaging grinder head at full throttle
• Eliminate shock loads to the engine by belts slipping or head stopping
Offset Cutting Head
• Provides operator with excellent visibility to stump
• Allows full rotation perpendicular to machine
Specs
- Cutting Depth: 12.5" below grade
- Cutting Height: 35" above grade
- Cutting Wheel: 19" diameter to tooth; 3/4" thick, 12 green teeth
- Dimensions: 34" (86.4 cm) W x 78" (198.1 cm) L x 48" (121.9 cm) H
- Engine: Kawasaki 730V Twin Cylinder
- Head Swing: 47" Arc
- Hydraulic Flow: 13.5 gpm hydraulic flow to head
- Weight: 1200 lbs. (545 kg)