Our Barreto Hydraulic 13hp Rear Tine Tiller rental was built for the rental and professional user markets; demanded and acclaimed by homeowners, contractors and nurserymen.
Performance. The weight balance, stability, and fast tine speed allow this Barreto tiller to work where others can’t. The shock absorbing action of hydraulic power means the Barreto won’t run away while tilling hard, rocky or unbroken ground.
Durability and Simplicity. The frame is constructed of heavy 3/16″ steel plate with double welded seams. The internally sealed body is also a 14 gallon hydraulic oil reservoir, keeping oil temperatures at a normal 150 degrees. The dependable tine drive hydraulic motor is directly mounted to the tine shaft, eliminating troublesome belts, chains and gears.
Transportable. The sturdy, specially designed tilt bed trailer makes it easy to move the Barreto. Low trailer profile and positive locking devices allow the tiller to be loaded and transported safely and conveniently.
Easy Operation. Fingertip controls offer infinitely variable ground speeds both forward and reverse, creating the ultimate in operating ease. Wheels operate independently of tines, allowing operator to easily match wheel speed to soil conditions. Tines can be rotated forward and reverse.
Low Maintenance. Most moving parts are lubricated by hydraulic oil. Shafts and bearings are protected by seals and plates There are only three grease fittings on the entire machine. Pressure relief valves prevent damage when tines or wheels are blocked.
Features:
- Marked grease points allow for easy maintenance
- Free-wheeling hubs unlock to transport the tiller without starting the engine
- Counter-rotating tines cut through sod and hard-packed soil
- Hydraulics are easily accessed for maintenance and repair
- Simple controls are easy to learn and easy to operate
Specs:
- Brand: Barreto
- Model: 1320H
- Engine: Honda GX390Length: 77″
- Width: 27″
- Height: 44″
- Tilling Width: 20″
- Weight: 560 lbs.
- Hydraulic Reservoir: 14 gallons
- Ground Drive Forward: 85 ft/minute
- Ground Drive Reverse: 85 ft/minute
WHY BARRETO?
DESIGN
All hydraulic means easy maintenance, no downtime, and the most efficient use of your horsepower to get the job done. Weight, balance, stability, and tine speed allow this tiller to work where others can’t. The open design allows for easy access to the hydraulics when maintaining or repairing. The heavy design means your tiller works for you instead of tossing you around. The tine drive motor is directly mounted to the tine shaft, resulting in a system so durable the original tiller was rented out for more than 20 years. Counter-rotating tines break up the most difficult soil, clay, or sod. The wheel drive and tine drive work independently of each other to allow your tilling travel speed to be adjusted to the soil conditions.
CONTROLS
The operator-friendly controls couldn’t be easier: one handle to set the tine drive and one to adjust the wheel drive. Engage the clutch lever, use the variable speed drive to adjust the ground speed, and engage the tines when you are ready to till. If you need to stop for a moment, drop the clutch and the tines and wheels will stop, leaving your engine running and ready to pick up where you left off.